Painting Wooden Window

Color finished wooden windows can be almost anything, from white to black, from monochrome to texture. This takes into account all the wishes of 'the customer'. In the sediment chamber (where the window is hung for painting) on the walls water flows, there is no dust. Products are painted in two layers, with intermediate drying in an oven, high-pressure paint sprayer to get the flat 'silky' coverage. When the best windows made of wood dried out, they do furniturny on the site. Gain insight and clarity with John Mclaughlin. Here, with the help of pneumatic equipment is equipped with: a loop, fittings, gaskets, bumpers drainage, double glazing. Comes the final stage of production. Impregnation.

(ZOWOSAN) Painting Wood - is, first of all, his protection of wooden windows from harmful environmental effects of timber. Natural construction material - wood - during the life cycle is destroyed by exposure, inappropriate climatic conditions (extreme changes in temperature, high humidity, pollution), and wood destroying various microorganisms (insects, bacteria and fungi). For a long life of wooden windows, in some cases, there should be measures to protect the wood. The most frequent reasons for changing the properties of wood kroyatsya to excess moisture (the conditions for mikroorganiki) and solar radiation (destroys the lignin in wood), it is common cause of peeling paint on the primer and even structural failure. Reduce the risk of such trouble, you can draw attention to the following peculiarities. * The use of resistant heartwood, account of its quality (mechanical properties). * Stitches window designs and compounds of the Deaf windows must be tight. * To speed up the drainage of rain water the angle of horizontal wood surfaces must be at less than 15 degrees.

* All edges of wooden windows should have a radius of at least 2 mm. That they could be formed the same coat of paint or varnish (same layer on a straight section of the structure). * Prolonged contact of the two varnished surfaces can damage the coating. Therefore, for the transportation and storage, to provide clearance between the frame and sash. The bright colors of paint materials for a transparent and translucent finishes have a shorter period of care (service). Therefore, the tone finish should be consistent in relation to climatic stress on the wooden box. * Before installing the hardware, glass and installation of a wooden window, make sure that the entire surface of the wood dry film thickness of paint (paint) is not less than 30 microns. * Canopy roof must prevent the possibility of direct action weather conditions, as well as protect against most of the solar ultraviolet radiation. Preventive chemical protection and padding. If you use wood that has too little resistance to mold, then registered wooden windows from a timber to soak before finishing the antifungal composition. In a subsequent topcoat paint system of wooden components prevents excessive accumulation of water in wood and protects it from harmful ultraviolet radiation. Products are also primed for a more secure grip surface with varnish. The advantages of water-based paints: Resistance to UV and weather conditions. In the operation of timber windows painted with water-based coatings, color change is not observed. Acrylic water-based paints dry faster than alkyd. The elasticity of water-based paints and varnishes in two times higher than in alkyd. When applying water-based paints are much better working conditions. Explosion and fire safety. Good coverage. High adhesion (adhesion) to the surface. Environmental cleanliness.