November 30, 2011

Industry Laboratory Breweries

This is an additional major advantage for developers and experts on application. Chemical Industry Laboratory Breweries premises solution seams Remmers SF 1 1-component silicate solution to fill the joints, is mixed only with water; exceptional chemical resistance, resistance to acids, alkalis and solvents, in accordance with DIN EN 12 808, an extremely high resistance to mechanical stress, resistance to stress, created during the cleaning process under high pressure, up to 120 bar at 150 C; heat resistance up to + 500 C; completely inorganic product, there is no need for security measures, not dangerous, not an organic product. Heat resistance up to +500 C, high resistance to abrasive load comparison himichesokoy sustainability products Remmers SF 1 and filling joints with cement-based one. Mixing product Remmers SF 1, packaged in packs of 5 kg was mixed with 700-750 ml of pure water. 2. Mixing Remmers SF 1 Remmers SF 1 is mixed with a stirrer for 60 seconds. The product "mature" for about 4 minutes, and then again stirred for about 60 seconds. 3.

Grouting Remmers SF 1 After the cleaning of tile coating of dirt lightly moistened with a sponge float, product Remmers SF 1 can be easily filled voids in seams (with excess) with the grout, for example, the program tools Remmers. 4. Cleaner product Remmers SF 1 after initiation of the reaction within 15 minutes after the start of the reaction, the product requires a slightly SF emulsify with water. It makes it easy to follow washing with the surface. 5. Disposal of any product residue after drying, produced a final cleaning all surfaces with a clean, clear water. 6. Surface after the grout Remmers SF 1 After completion of the reaction, the surface of joints filled with product Remmers SF 1 is ready for operation. Filler Grout Remmers SF 1 in comparison with other products Cement product properties Epoxy product Remmers SF 1 Application **** ** (Two) **** *** **** **** Durability: Resistant to acids - *** **** Resistance to alkalis **** *** *** *** Resistance to solvents * * **** resistance to early contact with water **** *** *** Resistance to abrasive load ** **** **** Resistance to thermal load of 200 C 100 C 500 C - it does not, * rather ** satisfactorily, *** good, **** excellent waterproofing slurry Remmers SD a variety of application possibilities thanks to the perfection of silicate This technology in industry and agriculture of sealing and protective systems are required such qualities are not always compatible: the highest mechanical and chemical resistance, combined with high resistance to thermal stress.

Nov 30, 2011 10:13:20 PM

Verify your Comment

Previewing your Comment

Posted by:  | 

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been saved. Comments are moderated and will not appear until approved by the author. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Leave a comment

Comments are moderated, and will not appear until the author has approved them.

(URLs automatically linked.)

Your Information

Name is required. Email address will not be displayed with the comment.

NEXT POST
Construction Country House Step 1. Site Selection The site for the construction of a country lady (cottage) can be obtained in two ways: through the administration area or in the secondary market by the owner, who wanted to sell his land. The first option extremely complex and not predictable, decision-making in state institutions is very long and illogical, as the future owner will have to take what will, provided that all free sites are available. However, if you do not spend money on bribes, the site can you get by much cheaper than buying on the secondary market. The second method assumes that you have a tidy sum of money (we are talking about areas in the prestigious areas), and you are ready to spend on site acquisition through a real estate agency. In this case, will have to pay the agency. Rate a complex plot dignity layman difficult agent to the countryside Real Estate on the nature of their work is interested in increasing prices and the realization of what is available (especially when you consider that the land market in prime locations is always a big deficit), so when choosing land except in the suburban real estate agent is desirable presence of the architect, particularly for areas with large differences of heights, construction on which is almost always more expensive than on flat areas. When choosing a site need to understand how big you want to have a plot. Plot sizes are directly related to the size of the future house and is like the extreme values of the density of buildings on the site, which provide comfortable conditions for life. For country houses (cottages) with a total area of 200 to 300 m2 (average size for these days) is required portion of 12 acres (1200 m2) and a built-up area of the building to 150-200 m2, that is very desirable cottage choose or design a relatively compact.
PREVIOUS POST
Ultraviolet In some cases, firms specify paint consumption (Coverage) in meters square with one kilogram (liter) of paint. In addition, the importance of such properties are the pigment density, which ranges from 0.5 g / cc. (Soot) to 9.55 g / cc. (Red lead), rate color, coloring power, the ability to zauklyuchayuschayasya share their pigment hue mixed with white pigment; svetoustoychivost, harmless to health; alkali resistance (exterior paint); corrosion resistance, etc. Color - Property bodies produce a certain visual sensation according to the spectral composition and intensity of reflected or emitted by their visible light. The main qualities of color - hue, saturation and lightness. Color coatings depends mainly on the color pigments, fillers and binders. Color is the visual and instrumental methods (GOST 16873-78). Luster - the ability to surface of the directionally reflected light beam. Gloss paint set by the photoelectric method. The essence of the method consists of measuring the photocurrent excited in a photodetector a beam of light reflected from the surface of the test coverage. Light resistance - ability of material to maintain its color under the action of light rays. In the operation of coating materials change their color under the ultraviolet rays of natural light and artificial light sources that emit ultraviolet rays. Coating materials prefabrication - ready for paint and varnish materials, and as pigments, binders and other materials constituting the paint film to be lightfast. This is especially important for exterior paint facades and roofs of buildings (such as enamel KO-168), open metal structures. In paints and inorganic pigments determine the conditional lightfastness (GOST 21903-76). Weathering - Paint property to resist the destructive action sunlight, rain, frost, snow, wind and other weather factors (eg, gases and dust, contaminating the lower atmosphere). To determine the weather resistance (GOST 6992-68) with the samples kept in the lacquer coating atmospheric conditions, followed by quantification of resistance of the coating to change the decorative and protective properties.

Nini

Throwing everything against the wall to see what sticks.

The TypePad Team

Search